دريل شاكوش هيلتي لاسلكي توتال، 950 وات TH309288

المميزات الرئيسية

• 950W input power for serious concrete drilling work
• SDS Plus chuck system for fast bit changes
• Concrete drilling capacity up to 28mm
• Steel drilling capacity up to 13mm
• Wood drilling capacity up to 30mm
• Variable speed up to 1,150 RPM
• Impact rate up to 4,670 BPM for fast hammer drilling
• 220V to 240V operation, runs off standard site power
• Genuine Total product with manufacturer warranty
• Suitable for HVAC outdoor unit mounting and electrical anchor work

Why a Rotary Hammer Outperforms a Standard Hammer Drill 

Anyone who’s tried to drill anchor bolts into KSA reinforced concrete with a normal hammer drill knows how that goes. The drill bogs down. The bit smokes. Twenty minutes of fighting the wall produces a half finished hole and a tired technician. Then you give up and borrow a proper rotary hammer from someone, and the same hole takes thirty seconds.

That’s the difference between hammer drilling and rotary hammer drilling. A standard hammer drill vibrates the bit at high frequency. A rotary hammer uses a piston driven mechanism to deliver actual impact energy down the bit. On concrete, brick, and masonry, the rotary hammer isn’t just faster, it’s a completely different category of tool.

The Total TH309288 is the working tradesperson’s rotary hammer. 950W of motor power, the SDS Plus chuck system that nearly every professional rotary hammer uses, and capacity ratings that cover the daily HVAC and electrical drilling work most crews actually do.

What 950W Power and 28mm Capacity Mean in Real Applications 

The 950W rating sits at the practical sweet spot for trade work. Heavy enough to handle reinforced concrete walls and slab drilling without bogging down. Light enough that the tool isn’t punishingly heavy after a full day of overhead work. The 28mm maximum concrete capacity covers most anchor bolt sizes used in HVAC outdoor unit mounting, condenser bracket fitting, and standard electrical and mechanical anchoring work.

For HVAC contractors specifically, the most common application is drilling anchor holes for outdoor AC unit brackets. Standard split AC outdoor unit brackets use anchor bolts in the 8mm to 12mm range, well within the TH309288’s capacity. For larger commercial units and rooftop equipment, anchor bolts up to 20mm are common, also within capacity. The 28mm headroom means you have margin for occasional larger work without needing a bigger machine.

For electricians, the 28mm capacity covers conduit penetrations, junction box anchoring, and most standard electrical mounting work. For general trade and finishing work, the steel and wood capacities (13mm and 30mm) handle the secondary drilling tasks the same tool gets used for.

SDS Plus System Benefits 

The SDS Plus chuck design is the global standard for rotary hammers in this size class. Bits drop in and lock with a quarter turn, no chuck key, no fumbling. Bit changes that take 20 seconds with a keyed chuck happen in 2 seconds with SDS Plus. On a job with multiple hole sizes, this saves real time over the course of a day.

SDS Plus drill bits are widely available across KSA, in standard masonry sizes from 5mm through 30mm. The TH309288 takes any standard SDS Plus bit, so you’re not locked into a proprietary system.

Variable Speed & High Impact Drilling Performance 

The 0 to 1,150 RPM variable speed range matters more than people think. For starting holes precisely on tile, brick, or marked concrete surfaces, you want low speed control to avoid the bit walking. For full power drilling once the hole is started, you want full RPM. The trigger on the TH309288 modulates speed continuously, so you can ease into a hole slowly and then bring up power once the bit is biting properly.

The 4,670 BPM impact rate is what does the actual concrete demolition work at the bit tip. Higher impact rates mean faster drilling in masonry. The TH309288’s rate is competitive with similar class rotary hammers and handles standard concrete comfortably.

Genuine Total Rotary Hammer with Manufacturer Warranty 

Counterfeit Total power tools exist in the Gulf market, especially in markets where the brand is widely known and budget conscious buyers are looking for deals. The TH309288 we sell at Cool.sa is sourced through verified Total supply channels and comes with manufacturer warranty. The packaging, model number, serial number, and tool finish are all checked. For a power tool that’s going to take daily abuse on a working site, sourcing matters more than the price tag.

Total TH309288 Applications & Best Use Cases 

• HVAC outdoor unit bracket installation on concrete walls
• Air conditioner condenser mounting and rooftop equipment fixing
• Electrical anchor bolt drilling for conduit and junction boxes
• Plumbing pipe penetrations through concrete and masonry
• Structural anchoring for shelving, racks, and equipment frames
• General concrete and masonry drilling for trade work
• Wood drilling for joinery and finishing applications
• Steel drilling for bracket and frame fabrication

Total TH309288 Technical Specifications 

Why Buy the Total TH309288 from Cool.sa 

في Cool.sa We supply Total power tools to HVAC contractors, electricians, mechanical fitters, and trade crews across Saudi Arabia. The Total tools we stock are sourced through verified channels with manufacturer warranty intact. We hold real stock for fast dispatch when a project is starting and a tool is needed urgently. We offer contractor pricing on volume orders, and we stock SDS Plus drill bits, hammer drill accessories, and PPE alongside the tools themselves so you can build a complete order in one place.

الأسئلة الشائعة

Q1. Can the TH309288 handle reinforced concrete walls?

Yes. The 950W motor and 4,670 BPM impact rate handle reinforced concrete comfortably for standard HVAC and electrical anchoring work. For very heavy reinforcement or thick slabs, a higher rated SDS Max machine might be faster, but for typical wall and slab drilling the TH309288 is the right size class.

Q2. What size SDS Plus bits does it take?

Any standard SDS Plus shank drill bit. The maximum drilling capacity is 28mm in concrete, but the chuck accepts smaller bits all the way down to 5mm or smaller for fine work.

Q3. Can I use this as a regular drill for wood and steel?

Yes. The tool has rotation only mode for non masonry drilling. Use HSS bits for steel and wood bits for timber. The 13mm steel and 30mm wood capacities cover most trade work.

Q4. Does it come with bits or accessories?

Standard packaging includes the tool with the SDS Plus chuck and basic accessories per the manufacturer specification. Drill bits are typically sold separately. We stock SDS Plus bits in all common sizes so you can order them together with the tool.

Q5. Is this genuine Total or a counterfeit?

Genuine, sourced through verified Total supply channels with manufacturer warranty. We don’t deal in grey market or counterfeit power tools.