2 Wire Cross Fitting Washing Machine Spin Timer
ال 2 wire spin timer is the mechanical timer controlling spin cycle duration on semi-automatic twin tub washing machines. The body is round with two slotted mounting ears, and the shaft is metal with a cross fitting — a pin passing through the shaft to retain the knob.
يحمل ملفين only two wires, making it the simplest timer in the machine to connect.
متوفر في Cool.sa بمخزون داخل المملكة، مع فاتورة ضريبية وتأكيد التوافق قبل الطلب.
أبرز المميزات
- Mechanical spin timer للغسالات نصف الأوتوماتيكية ذات الحوضين
- Two wires only, the simplest connection of any timer in the machine
- Metal shaft with cross fitting, retained by a pin through the shaft
- Round body with two slotted mounting ears for position adjustment
- يعمل بآلية ميكانيكية بحتة بلا إلكترونيات ولا برمجة ولا بطارية
- جسم بلاستيكي مقاوم للحرارة والرطوبة في بيئة الغسالة
المواصفات الفنية
| المواصفة | القيمة |
| نوع القطعة | Mechanical spin timer |
| عدد الأسلاك | 2 |
| Connection type | Wire loom |
| نوع العمود | Metal with cross fitting (through pin) |
| Body shape | Round with two mounting ears |
| التثبيت | Two slotted holes |
| نوع الغسالة | نصف أوتوماتيكية، حوضين |
لماذا تشتري تايمر الغسالة من كول
- We stock both shaft fitting types. Cross and flat side, so you are not left hunting elsewhere if your machine’s shaft differs.
- We stock both spin and wash timers. Most sellers carry one type only.
- We publish wire count and shaft type clearly. Most listings say “washing machine timer” with no specification at all.
- تأكيد التوافق قبل الطلب. Send a photo of the shaft with the knob removed and we confirm in writing.
- مخزون داخل المملكة وتوصيل سريع.
- فاتورة ضريبية نظامية مقبولة في مشتريات الشركات والمنشآت والسكن العمالي.
- أسعار كميات للسكن العمالي والمغاسل وشركات الصيانة وإدارة المرافق.
- قطع مكمّلة from the same stock: wash timers, drain switches and drain pumps.
- تشكيلة قطع غيار الغسالات لدينا. لتجهيز الإصلاح من مورّد واحد.
الأسئلة الشائعة
Q1. What does cross fitting mean?
It is how the knob attaches to the shaft, using a metal pin passing across through the shaft. Other designs use a flat machined side on the shaft instead. A knob is made for one type only and they do not swap.
Q2. How do I identify my machine’s shaft type?
Remove the knob from your failed timer and look at the shaft. A pin passing across means cross fitting. A flat side with no pin means the other type.
Q3. What is the difference between a spin timer and a wash timer?
The spin timer runs the spin tub in one direction for a short duration; the wash timer runs the wash tub, reverses the motor, and runs considerably longer. This model is a spin timer.
Q4. Why only two wires when a wash timer has six or seven?
Because the job is simpler. A wash timer reverses the motor direction, which requires multiple paths. A spin timer runs the motor one way then cuts it.
English 
العربية