Samsung Washing Machine Door Lock – emz Type 888.4
Door interlock for Samsung front-loading الغسالات, manufactured by emz Hanauer of Germany, type reference 888.4, rated 250 V AC with three numbered terminals. emz is Samsung’s own door lock supplier, so this is the same manufacturer that builds the part fitted at the factory. In stock at Cool.sa in Riyadh and Khamis Mushait.
أبرز المميزات
- Made by emz Hanauer of Germany, the OEM supplier of Samsung washing machine door interlocks.
- Type reference 888.4 moulded into the body, the identifier a technician uses to match the old lock.
- 250 V AC, with three terminals numbered 1, 2 and 3.
- PTC thermal mechanism, no solenoid, no moving coil to burn out.
- Data-matrix code on the body for production batch traceability.
- The emz name is moulded into the plastic, not printed in ink, copies carry neither.
- We identify the correct lock from the emz type number on your old part before you buy.
- Samsung fits at least ten different interlocks across its range; we check yours before the order ships.
Samsung uses ten different door locks. Here is how to tell which you need
This is the question every spare parts site avoids. Samsung fits at least ten distinct interlocks across its washing machine range. DC34-00025D, DC34-00026A, DC34-00028A, DC34-00028B, DC64-00519D, DC64-00652D, DC64-00653A, DC64-01538A, DC64-02032A and DC97-19401A, and they are not interchangeable.
Work through these four in order:
- Read the emz type number on your old lock. Samsung’s locks are made by emz, and every one carries an emz type reference moulded or printed on the body, 854, 857, 881, 888 and so on. This is the fastest and most reliable identifier. Ours is 888.4.
- Count and check the terminals. This unit has three, numbered 1, 2 and 3. Some Samsung locks use a different count or different markings.
- Check the Samsung DC number on your machine’s rating plate, inside the door frame or behind the filter flap.
- Compare the actuator and mounting. The lever position, the square aperture and the mounting hole pattern must match your original.
Not sure? Photograph your old lock on both faces, including any emz type number, and send it to us. We confirm the match before you pay. With ten Samsung variants in circulation, this one step prevents nearly every wrong order.
المواصفات المؤكدة
| الشركة المصنّعة | emz Hanauer GmbH & Co. KGaA, Germany |
| Type reference | 888.4 |
| آلية العمل | قفل حراري PTC |
| آلية العمل | 3, numbered 1 · 2 · 3 |
| الجهد الكهربائي | 250 فولت تيار متردد |
| Traceability | Batch codes and data-matrix, as marked |
Every value above is read from the markings on the component in the product photographs. We do not publish specifications we cannot see on the part.
Samsung part numbers – what we can and cannot confirm
We publish what we can verify. Samsung part DC34-00028A is catalogued as replacing emz reference T65888.1, the same 888 series as this component. The sub-variant differs, and we have not independently confirmed that 888.4 and 888.1 interchange.
So rather than print a part number we cannot stand behind: send us a photo of your old lock and we will tell you whether this is the correct replacement. If it is not, we stock other Samsung interlocks and will point you to the right one.
كيف يعمل هذا القفل؟
The interlock tells the control board the door is shut and holds it shut while the drum turns. Nothing starts until its contacts close, no fill, no wash, no spin.
It works by a PTC thermal element rather than a solenoid. Power reaches the element, it heats and expands, and the latch drives home. At the end of the cycle the power is cut and the element must cool before the latch releases, which is why a Samsung front loader keeps the door shut for a short period after the programme ends. That delay is designed behaviour, not a fault.
متى تحتاج إلى تغيير قفل باب الغسالة؟
علامات تشير إلى القفل:
- الباب يُغلق ويثبت ميكانيكياً لكن الغسالة لا تبدأ البرنامج
- لا يصدر صوت طقطقة من القفل عند تشغيل الدورة
- الغسالة تملأ الماء لكنها لا تعصر والباب مقفل تماماً
- الباب يبقى مقفلاً بعد انتهاء الدورة وتوقف الحلة
- Continuity test across the switched terminals shows an open circuit once the lock has been energised
علامات تشير إلى عطل آخر:
- الباب لا يثبت ميكانيكياً عند إغلاقه: المفصلة أو لسان القفل أو جلدة الباب
- الغسالة لا تعمل نهائياً ولا تضيء الشاشة: الكهرباء أو البورد الرئيسي
- الدورة تكتمل والباب يُفتح طبيعياً: الدورة تكتمل والباب يُفتح طبيعياً:
- الخطأ يعود فوراً مع قفل جديد: ضفيرة الأسلاك أو البورد
قبل الفحص أو الفك: افصل الغسالة عن الكهرباء تماماً. أطراف القفل تحمل 250 فولت أثناء التشغيل.
ليش تشتري من كول؟
- We explain how to identify your Samsung lock instead of telling you to check your model number and leaving you there.
- We name the manufacturer and the emz type. Most listings say “Samsung door lock” and stop.
- We say what we cannot confirm rather than printing a part number that might be wrong.
- بضاعة موجودة فيالرياض وخميس مشيط.
- نؤكد المطابقة من صورة قبل الشراء.وأسعار جملة للورش والفنيين.
اطلب القفل الآن
emz type 888.4 interlock in stock now at both كول متجر branches. Order online for delivery across Saudi Arabia, or collect the same day in Riyadh or Khamis Mushait. Send a photo of your old lock first, with ten Samsung variants in circulation, it is worth the minute.
الأسئلة الشائعة
Q1. How do I know which Samsung door lock my machine takes?
Read the emz type number on the old lock, it is the most reliable identifier, because emz makes all of Samsung’s interlocks. Failing that, the Samsung DC number is on the rating plate inside the door frame. Send us a photo either way and we will confirm.
Q2. Will this fit my Samsung Ecobubble?
Ecobubble machines use several different interlocks depending on the model year and variant. Do not order on the product line name alone. Send us a photo of your old lock and we will tell you.
Q3. Is this a genuine part?
It is made by emz Hanauer, the German manufacturer that supplies Samsung’s door interlocks. It carries the emz name moulded into the body and an emz type reference, which copies do not.
Q4. The door stays shut for a minute or two after the wash. Is it faulty?
بعض موديلات هذه العلامات التجارية تعتمد على نفس منصة التصنيع المستخدمة في غسالات Beko، ولذلك قد تستخدم قفل الأمان نفسه. تحقق من رقم القطعة الخاص بغسالتك أو أرسل لنا صورة للقفل القديم، وسنساعدك في التأكد من التوافق.
Q5. Can I bypass the lock?
لا، لا يُنصح بذلك إطلاقًا. فتجاوز دائرة قفل الأمان قد يسمح للحوض بالدوران بينما الباب غير مؤمّن، مما يشكل خطرًا على المستخدم. فقفل الباب من أهم مكونات السلامة في الغسالة، ووظيفته الأساسية حماية المستخدم أثناء التشغيل.
