Blog

Twin Tub Washing Machine: How it Works, Which Size to Buy & How to Keep it Running

twin tub washing machine with both lids open

A twin tub washing machine, also called a semi-automatic washer, has two drums side by side. One washes, one spins. You move the clothes between them by hand. It costs less than a fully automatic machine, washes fast and is simple to repair. That is why it is still a common choice in Saudi homes, especially for large families and heavy laundry such as thobes, blankets and work clothes.

This guide explains how a twin tub works, what the numbers on the spec sheet really mean, how to choose the right size for a Saudi home, and which parts wear out first. That last part is where we spend our days at Cool.

What Is a Twin Tub Washing Machine?

A twin tub has a wash tub with a pulsator (a ridged disc at the bottom that churns the water) and a separate spin basket that wrings water out at high speed. Each side has its own motor and its own timer, so you can spin one load while the next one washes.

There is no programme that fills, washes, rinses and spins on its own. You control each stage, so a twin tub uses only the water and time you choose. In return, you have to stay near it while it runs.

How a Twin Tub Works, Step by Step

  1. Fill the wash tub through the inlet hose (or a bucket) to the water level that matches your load.
  2. Add detergent, let it dissolve, then add the clothes.
  3. Choose the wash mode (gentle, normal or strong) and set the wash timer, usually up to 15 minutes.
  4. Turn the drain selector to empty the wash tub. Most twin tubs drain by gravity, so the hose must sit lower than the machine.
  5. Refill and rinse. Most loads need one or two rinses.
  6. Move the clothes to the spin basket, spread them evenly, fit the inner cover, close the lid and set the spin timer (usually up to 5 minutes).
  7. Hang the clothes to finish drying. A spin dryer removes water but does not dry with heat.
Twin Tub Washing Machine Spare Parts
Twin Tub Parts in Stock

Timers, Gearboxes, Spin Seals & Drain Switches

Available at our Riyadh (Ghirnata and Yarmuk) and Khamis Mushait (Atud) branches, with delivery across the Kingdom. Not sure which part fits? Send us a photo on WhatsApp 0540663777.

Wash Capacity vs Spin Capacity

The big number on the box is the wash capacity. The spin basket is smaller. Midea’s 14 kg model spins 8 kg, and Panasonic’s 13 kg model also spins 8 kg. If you fill the wash tub to the top, plan to spin in two batches. Overloading the spin basket is the most common cause of shaking, noise and early wear on the spin side.

Twin Tub Specs: What the Numbers Mean

Spec

Midea MT100W140

Panasonic NA-W13XG2

What it tells you

Wash / spin capacity

14 kg / 8 kg

13 kg / 8 kg

Spin in batches when the wash tub is full

Rated power (wash / spin)

480 W / 200 W

500 W / 210 W

Two motors. Peak draw is when both run.

Timers (wash / spin)

15 / 5

15 min (+20 min soak) / 5 min

Short, user-controlled cycles

Spin speed

about 1,250 rpm

1,490 rpm

Higher = drier clothes, harder on delicates

Water per fill

42–92 L (4 levels)

105 L (standard)

Pick the level and reuse wash water to save

Power supply

220–240 V, 50 Hz

230 V, 60 Hz

Saudi mains is 230 V / 60 Hz

twin tub control panel with wash timer

Twin Tub vs Automatic Washing Machine

 

Twin tub (semi-automatic)

Fully automatic (top or front load)

Price

Lower for the same capacity

Higher

Your time

You stay near it and move clothes

Load, press start, walk away

Water

You set the level and can reuse wash water

Programme decides

Hot water

Usually none (cold fill)

Many front loaders heat water

Speed

Fast wash and spin, can overlap

Longer full programmes

Repairs

Mechanical timers, belts, gearbox, easy to source

Electronic boards, sensors, costlier

Best for

Large families, heavy or very dirty loads, tight budgets

Busy households, delicate fabrics

Which Capacity Do You Need?

Your laundry

Suggested wash capacity

Watch out for

One or two people, daily clothes

7–9 kg

Blankets won’t fit

Family of 4–6, thobes and school uniforms

10–12 kg

Spin basket size; check it on the spec sheet

Large family, or blankets and bedding at home

13–18 kg

Floor space and a drain point nearby

This is a practical guideline, not a manufacturer rule. Size by your heaviest regular load, not by an average day.

Buying Checklist for Saudi Homes

  • 60 Hz on the rating plate. Saudi mains is 230 V, 60 Hz, with Type G plugs. Some imported models are built for 50 Hz.
  • SASO energy label. Look for the Saudi energy efficiency label on the machine or box. SASO’s washing-machine standard (SASO 2885) treats top-load and twin-tub machines as their own category, and a revised version adds a water-consumption class.
  • Spin capacity and rpm, not only the wash capacity.
  • Water inlet and level selector, so you can match water to the load.
  • Drain type and height. Gravity drains need a floor drain lower than the machine.
  • Rust-proof plastic body, especially in Jeddah, Dammam and other humid coastal cities.
  • Lint filter in the wash tub.
  • Warranty and parts. Common brands (Hitachi, Toshiba, LG, Midea and others) have timers, gearboxes and seals readily available. Ask about parts before you buy an unfamiliar brand.
  • Space. The two 13–14 kg models above measure about 90–96 cm wide, 54–55 cm deep and 105 cm tall. Check the exact model.

Maintenance That Keeps a Twin Tub Running

After Every Wash

  • Empty and rinse the lint filter.
  • Drain the wash tub fully and leave both lids open to dry.
  • Wipe water from the control panel and around the timer knobs.

Every Month

Run an empty wash with a drum cleaner or white vinegar to remove detergent build-up.

  • Check the inlet and drain hoses for cracks and blockages.
  • Look under the spin side for water marks. That is an early sign of a worn spin seal.
  • Make sure the machine stands level, so the spin basket doesn’t knock.

Common Twin Tub Problems and the Part Behind Them

Problem

Likely cause

Part to check

Wash tub doesn’t turn, motor hums

Belt, motor capacitor or gearbox

Washing machine gearbox

Wash doesn’t stop, or stops early

Wash timer

Washing machine timers

Spin tub doesn’t spin

Spin timer, lid safety switch, belt or brake

Spin timer ET007 (5 min)

Spin tub shakes or bangs

Uneven or overloaded basket, machine not level

No part. Redistribute the load and spin in two batches.

Water leaks under the machine while spinning

Spin seal or drain hose

Twin tub spin seal ARAH-GBHS-153

Wash tub won’t drain, or drains while washing

Drain selector, drain valve or drain switch

Hitachi drain switch XK-2S

Grinding noise from the wash tub

Gearbox or pulsator wear

Hitachi twin tub gearbox

Burning smell

Motor stalled or overloaded

Switch off and unplug, then call a technician

Always unplug the machine before opening any panel. Matching a timer means counting its wires and checking the mounting holes, so a photo of the old part saves a wrong order.

Washing Machine Spare Parts
Need Help Finding the Right Part?

Not Sure Which Timer or Gearbox Fits Your Machine?

Send a photo of the old part and the model sticker on WhatsApp 0540663777, and we’ll confirm the match before you order.

Frequently Asked Questions

Q1. Is a twin tub the same as a semi-automatic washing machine?

Yes. Both names describe a machine with separate wash and spin tubs where you move the clothes and control each stage yourself.

Q2. Does a twin tub use less water than an automatic?

It can, but only when you choose a lower water level and reuse the wash water. Water use per fill varies a lot. One 14 kg model ranges from 42 L to 92 L depending on the level selected.

Q3. How long does a twin tub wash take?

The wash timer usually runs up to 15 minutes and the spin timer up to 5 minutes. Add one or two rinses, and a full load takes roughly 30–45 minutes, depending on rinses and spin batches.

Q4. Can I run the wash and spin tubs at the same time?

Yes. Each tub has its own motor and timer, so you can spin one load while the next one washes.

Q5. Why does my twin tub spin only when I press the lid?

The spin lid has a safety switch that cuts the motor when the lid opens. If spinning only works while you press the lid, the switch or its actuator is worn or out of position.