YORK Glycol Coolant 20L Can, Part No. 013-03344-000
A 20-litre pack of genuine YORK glycol coolant under approved part number 013-03344-000. This is the pack you order for an initial fill of a chilled water circuit, or when the system is drained and refilled during annual overhaul, when you need enough volume to charge the whole circuit at the correct concentration in one go.
Key Features
- 20-litre pack, sized for initial fills and charging larger circuits
- Approved YORK part number: 013-03344-000
- Allows mixing the solution in one batch at uniform concentration
- Carries a corrosion inhibitor package for closed-loop metals
- Suitable for systems running at or below 0°C
- The contractor, maintenance-contract and project choice
There are really only two moments you need 20 litres of glycol, commissioning a new system, or draining, flushing and refilling an existing one.
And in both cases, the same mistake recurs: buying too little, then stretching what you have with more water than you should “to make it reach.” The result is a system running below the required concentration, with no real freeze protection and no corrosion protection. The damage shows up two years later as a corroded heat exchanger, and nobody traces it back to fill day.
The large pack isn’t just about price. It’s what lets you calculate circuit volume, set the correct ratio, and mix the solution in a single batch, instead of filling in stages at inconsistent concentrations.
And because you’re ordering by part number 013-03344-000, you get the specification York approved for its own systems, with the corrosion inhibitor package that protects the copper, steel and heat exchanger in a closed loop.
Applications
- Initial fill of chilled water circuits at commissioning
- Refill after flushing or draining during annual overhaul
- Cold room chillers and freezing systems
- Food and industrial production lines running below zero
- Central AC projects and facility management
Technical Specifications
| Specification | Value |
| Part number | 013-03344-000 |
| Volume | 20 litres |
| Type | Glycol coolant for chilled water circuits |
| Manufacturer | YORK |
Add from datasheet: glycol type (ethylene/propylene) · concentration · colour · freeze point · pH
Why Buy from Cool.sa
FAQ
Q1. When do I need 20L instead of 4L?
For an initial fill of a new system, or after draining and flushing, when the full circuit needs charging at a uniform concentration.
Q2. How many packs does my system need?
It depends on circuit volume (litres) and the required ratio. Send us your system capacity and lowest operating temperature, and we’ll calculate it.
Q3. Do I dilute it or use it neat?
That depends on whether the pack is concentrate or pre-diluted. Check the datasheet, guessing is the most common filling error.
Q4. How do I verify concentration after filling?
Use a refractometer. Take the reading after the solution has circulated, not immediately after mixing.
English 
العربية