YORK Glycol Coolant 4L Can, Part No. (013-04129-000)
A 4-litre pack of genuine YORK glycol coolant under part number 013-04129-000. This isn’t the initial-fill pack, it’s the maintenance pack: making up losses after a minor leak, or raising concentration after the refractometer reads below target. The one your service technician keeps in the van.
Key Features
- 4-litre pack: the practical size for top-ups and concentration correction
- Approved YORK part number: 013-04129-000
- Lives in the service van: ready when needed
- Maintains specification consistency in the circuit (no mixed inhibitor packages)
- No waste, you don’t buy twenty litres to correct a small shortfall
- Suited to scheduled maintenance contracts
Most chiller water circuits don’t lose glycol all at once. They lose it drop by drop: a weeping joint, a partial drain during a pump repair, or make-up water added in a hurry that quietly diluted the solution.
After a few rounds of that, the refractometer reads below target, and the system is running under-protected without anyone noticing. The answer isn’t draining the circuit and refilling with twenty litres. The answer is four litres that put the concentration back where it belongs.
That’s exactly why this pack exists. A practical size that lives in the service van, gets used when needed, and doesn’t sit half-empty in the store losing effectiveness.
Ordering glycol chiller by part number 013-04129-000 ensures you’re adding the same specification already in the circuit, which matters more than people think: mixing glycols with different inhibitor packages can weaken protection rather than restore it.
Applications
- Topping up losses after a leak or partial drain
- Raising concentration after a low refractometer reading
- Routine maintenance of chilled water circuits
- Refilling after a pump or valve repair
- Stocking the service van and workshop
Technical Specifications
| Specification | Value |
| Part number | 013-04129-000 |
| Volume | 4 litres |
| Type | Glycol coolant for chilled water circuits |
| Manufacturer | YORK |
Add from datasheet: glycol type (ethylene/propylene) · concentration · colour · freeze point · pH
Why Buy from Cool.sa
At Cool.sa We stock the size you actually need. Four litres to correct a concentration, or twenty for a full fill, we don’t push a large pack for a small job. And we confirm the part number matches what’s already in your circuit before shipping. Technician and maintenance-contract pricing, fast Kingdom-wide delivery.
FAQ
Q1. When do I use the 4L pack?
For topping up a small loss after a leak or partial drain, or raising concentration after a low refractometer reading.
Q2. My glycol reading dropped & how much do I add?
It depends on circuit volume and the gap between your current and target concentration. Send us both readings and your system capacity, and we’ll calculate it.
Q3. Should I add glycol or water when the level drops?
That depends on why the level dropped. If solution leaked out, add solution at the same concentration. If water evaporated, add water. A refractometer reading will confirm the correct approach.
Q4. Can I mix it with another brand already in the circuit?
It’s best not to. Different corrosion inhibitor packages can be incompatible. Order the same specification whenever possible.
Q5. How is it different from the 20L pack?
The only difference is size and intended use: the 20L pack is for initial fills, while the 4L pack is designed for top-ups and concentration correction.
Q6. Will it work in non-YORK chillers?
It’s approved to YORK’s specification. For other systems, check your manufacturer’s specification before use.
English 
العربية