Insulation, Fiberglass Insulation Specs: 24mmx25kg/m3

The heat and unwanted noise works so well that if you put it in your doors it gives them a solid modern sound when they close. Could be used on floors, firewall, door panels, trunk, roof and any interior areas that should be insulated

• Material: Aluminum Fiber+ Muffler Cotton

• No powder & Excellent vibration resistance

• Excellent sound absorption properties

• Will not contribute to metal corrosion

• Very clean, not absorb odors, odorless

• Easily installs, fit all kinds of vehicle type

• Self sticking backing & Waterproof, dustproof.

Note: Not to be applied directly to heat sources including: exhaust pipes, mufflers or hot turbo pipes.

The compression will lead to a certain volume reduction, but it does not affect the use. If you care about this, you can buy a thicker one according to your own needs.

Installation Notices:

• Please clean the surface you want to paste.
• Make insulation materials and sheet metal firm fit, and play best adhesive, damping performance.
• Do not cover the chassis wiring or air holes when you install.
• Appropriate use of adhesive tape will strengthen connections.
• Paste Aluminum Soundproof/Damping Plate, you could heat with a hair dryer to make it soft, then compacted by hand. If the room temperature is below 5 degrees Celsius, first with a sun lamp heating it until soft. Then remove the wax paper and paste it.
• A successful installation process is best not to repeat tear paste, paste effect won’t be damaged
• The extra insulation can be pasted in some hidden place.
• It is not possible that there is an effect on the hearing by only a door installation ,it requires completed construction.
• Perfect for door, roof, floors, hood, firewall, chassis, trunk room, trunk lid and so on.

Package includes:

1 X Heat Shield Mat

Product’s Properties:

Purpose of insulated ducting.

As discussed, insulated air ducts minimize heat loss by conduction, enabling the HVAC system to maintain a comfortable temperature while reducing energy usage. Decreasing energy waste and consumption reduces both the amount of fuel needed to generate power and the greenhouse gasses emitted as a result.

Thickness of duct insulation.

(24 kg/m3) density: 11/2″ or 2″ (38mm or 51mm) thick The duct wrap insulation shall consist of a blanket of glass fibers factory-laminated to a reinforced foil/ kraft (FRK) vapor retarder facing with a 2″ (50mm) (minimum)

Insulating of HVAC.

Steps for Insulating HVAC Ductwork

Press a continuous strip of foil tape to all longitudinal seams along straight runs of duct. Use a paintbrush to apply duct mastic to the joints where an elbow connects to a duct. Use a utility knife to cut foil-faced fiberglass insulation to the proper size.

Importance of Insulation in HVAC.

Why is thermal HVAC insulation so important? Effective thermal insulation ensures that the medium (air or liquid) stays at the right temperature, reducing energy loss throughout the system and preventing the risk of condensation.

When should ducts be insulated?

According to experts, ductwork installed inside a thermal building doesn’t require insulation. Further, the need of insulating these ducts depends on the climate of the place. Insulation is necessary for cold and humid climates; however, insulation is not necessarily required in mild climates.

Air ducts need insulation.

Ducts are made of sheet metal, fiberglass, or other materials. Ducts that leak heated air into unheated spaces can add hundreds of dollars a year to your heating and cooling bills, but you can reduce that loss by sealing and insulating your ducts. Insulating ducts in unconditioned spaces is usually very cost-effective.

Advantages

If the space surrounding an uninsulated duct system is cooler than the air in the ducts, heat will flow from the ducts to that cooler space. The opposite is true, as well. If the space surrounding an uninsulated duct system is warmer than air in the duct system, heat will flow from the surrounding air to the ducts.

Gratefulness

Thank you for choosing us! We are dedicated to giving you the best products possible. If you have any questions, feel free to get in touch.