York Refrigeration Oil K (18.9L Can)

Why Type K Belongs in High-Value Compressors 

A York chiller or industrial refrigeration compressor represents serious capital. The lubricant inside it should not be an open question. York PureOil Type K is the genuine lubricant developed for compatible York HFC compressor platforms, and it is engineered around the operating realities these compressors actually face, high discharge temperatures, demanding bearing loads, long duty cycles, and the chemical environment of HFC refrigerants moving through the system.

The York PureOil family is built around a clear principle. Quality lubrication for refrigeration compressors comes from base oil quality, not from heavy additive packages. Type K embodies that principle. It is a clean, refined, controlled lubricant with high flash point, low moisture content, low pour point, and no unnecessary chemistry that could interact unpredictably with the refrigerant or with system materials over thousands of operating hours.

Where Type K is Specified

Type K is approved within the York oil application matrix for specific compressor platforms operating on environmentally compatible refrigerant gases including HFCs. The exact list of approved equipment is defined in the York PureOil specification documents. Always confirm against your chiller’s nameplate or the official York oil application document before charging Type K into a compressor. Different York compressors call for Oil C, Oil E, Oil H, Oil K, Oil L, or other grades depending on compressor design and refrigerant pairing.

Practical Service Realities in Saudi Arabia

Saudi industrial cooling plants and commercial chiller installations work hard. Long summer cooling seasons, high condensing temperatures, and continuous duty cycles put real demands on compressor oil. Type K is designed to handle that envelope. Field service practice typically combines an annual oil sample with a planned change interval based on the sample analysis. When acid number rises, water content increases, viscosity drifts, or wear metal counts climb, the maintenance protocol drains the existing charge, changes the filter, and refills with fresh sealed genuine Type K. 

Handling Discipline

Genuine oils ship in sealed pails for a reason. Once opened, the pail should be dispensed through a clean, dedicated pump and resealed immediately. Saudi humidity, particularly in coastal regions, will load any opened oil container with moisture. Cross-contamination between mineral oil and POE oil dispensing equipment is one of the most preventable causes of oil-related compressor problems, and shop discipline solves it. 

What You Are Actually Buying

Cool.sa supplies York PureOil Type K in factory-sealed 5 gallon pails. The product is the same specification used by York and Johnson Controls service teams, traceable to the official York PureOil quality standard. For facility engineers, MEP contractors, and refrigeration service companies who maintain York equipment in critical applications, this is the oil that protects both the compressor and the warranty. 

Applications / Best Use Cases

• York compressors and chillers calling for Oil K in the York oil application matrix
• Industrial refrigeration plants and large commercial air-conditioning systems
• HFC refrigerant applications on compatible York equipment
• Compressor commissioning and full oil changes
• Major service work after compressor overhauls
• Cold storage, food processing, and commercial cooling installations across Saudi Arabia using York equipment

Technical Specifications

Why Buy York Refrigeration Oil K (18.9L Can) From Cool.sa

Cool.sa is a trusted supplier of genuine York compressor lubricants and refrigeration spare parts in Saudi Arabia. We deliver York PureOil products in factory-sealed packaging with accurate part traceability, fast nationwide dispatch, and technical support to help you select the correct oil grade for your equipment. For service teams maintaining York chillers and industrial refrigeration in Riyadh, Jeddah, Dammam, and across the Kingdom, Cool.sa is the practical sourcing channel for the lubricants York specifies. 

Frequently Asked Questions

Q1: What is the shelf life of York Refrigeration Oil K?

York Refrigeration Oil K has a shelf life of 5 years from the date of production when stored under recommended sealed and controlled storage conditions.

Q2: Where is York Refrigeration Oil K imported from?

York Refrigeration Oil K is directly imported from the USA.

Q3: Which York compressors are approved for Oil K?

Oil K is specified for selected York compressor platforms operating with environmentally compatible refrigerant gases, including HFC-based systems. The exact list of approved applications is defined in the official York PureOil oil application documentation. Always verify compatibility against the chiller nameplate or service manual before use.

Q4: Is Oil K the same as Oil H?

No. Oil K and Oil H are distinct formulations within the York PureOil lubricant family. Each product is engineered for specific compressor designs and operating conditions, and they are not freely interchangeable.

Q5: Can I top up an existing Oil K charge with another POE oil?

It is recommended to top up using the same genuine York lubricant. Mixing POE oils from different manufacturers can introduce differences in additive chemistry and performance characteristics, which may affect long-term system stability and reliability.